1. Ma'anar Asali & Siffofin Tsarin"

Bearings na UCP213 (Bearings na Filogi tare da Sakawa) na'urori ne da aka riga aka haɗa waɗanda suka ƙunshi abin saka bearing da aka sanya a cikin ƙarfen siminti ko kuma sandar ƙarfe da aka matse. Manyan halaye sun haɗa da:

• "Fuskar Waje Mai Siffa Mai Siffa‌: Diamita na waje mai ɗaukar kaya yana da ƙirar zagaye, wanda ke ba da damar daidaita kansa ta ±3°.
• "Tsarin da aka riga aka rufe‌: Hatimin roba na yau da kullun (tsarin RS ko 2RS) suna ba da kariya mai ƙimar IP54 daga ƙura da shigar ruwa.
• "Gidaje Masu Daidaituwa‌: Ya yi daidai da ISO 113:2015, yana tabbatar da cewa ana iya musayar tazara tsakanin ramukan da aka saka.

"2. Ka'idojin Aiki & Halayen Inji"

2.1 Tsarin Watsa Loda

Canja wurin kaya yana faruwa ta hanyar abubuwan birgima (ƙwallon ƙarfe) tsakanin zoben ciki da na waje:

• "Loads na Radial‌: An watsa shi tare da radius ɗin bearing (wanda ya kai kusan kashi 70% na ƙarfin kaya).
• "Loads na Axial‌: Yana ɗaukar ƙarfin axial na unidirectional (≈20% na ƙarfin ɗaukar nauyin radial).
• Ma'aunin gogayya mai ƙarancin birgima: 0.001–0.003
• Matsakaicin gudu: 3,000 rpm tare da man shafawa mai tushen lithium (rayuwa mai mai na awanni 2,000 @ 70°C).
• Haɗa shafts ɗin tuƙi na masu girbi (zafin aiki: -30°C zuwa 80°C)
• Na'urorin rage tsutsotsi na tsarin ban ruwa (suna buƙatar rufin hana lalata)
• Na'urorin tuƙi na conveyor bel (nau'ikan ƙarfe marasa ƙarfe masu bin ka'idar FDA)
• Tsarin crank a cikin injunan marufi (tare da jure wa nauyin girgiza mai zagaye)
• Allon girgiza a cikin injin niƙa (yana buƙatar ƙarin hatimin labyrinth)
• Na'urorin rollers na musamman na jigilar bel (maganin shafawa na musamman don muhallin ƙura)

2.2 Halayen Tribological

"3. Yanayin Aikace-aikace na yau da kullun"

3.1 Injinan Noma

3.2 Masana'antar Sarrafa Abinci

3.3 Kayan Aikin Haƙar Ma'adinai

"4. Jagororin Zaɓin Fasaha

"