China UCP214 Bearings: Babban Tallafi ga masana'antar da masana'antun samar da wutar lantarki ta masana'antu

Bearings na UCP214: Babban Tallafi ga Watsa Wutar Lantarki na Masana'antu

Takaitaccen Bayani:

Zoben waje na bearing na UCP yana da ƙirar zagaye wanda ke haɗuwa da saman gidan bearing mai lanƙwasa. Wannan tsari yana ba da damar rama kuskuren axial a cikin kewayon 0.5° zuwa 2°, ta haka yana daidaita yanayi daban-daban na shigarwa. Tsarin haɗin gwiwa yana sauƙaƙa tsarin haɗawa kuma yana ba da damar maye gurbin sassan bearing daban-daban yayin kulawa, don haka rage lokacin kulawa da farashin da ke da alaƙa. Hatimin hulɗa mai gefe biyu yana hana shigar ƙura yadda ya kamata, yana sa bearing ya dace da amfani a cikin yanayin ƙura. Bugu da ƙari, bearing na UCP yana da ikon aiki da aminci a ƙarƙashin yanayin zafi tsakanin -30°C zuwa 120°C, wanda ke tabbatar da amfaninsa a cikin aikace-aikacen sauri da nauyi mai yawa.

Aika mana imel Sauke shi azaman PDF

Cikakken Bayani game da Samfurin

Alamun Samfura

Bearings na UCP214: Babban Tallafi ga Watsa Wutar Lantarki na Masana'antu,
,

	Girman UC Bearing (mm)			TOSHE (gidaje) Girman (mm)
MISALI	Zoben ciki	Zoben waje	Tsawon zoben ciki	faɗi	tsawon	tsayi	Nisa tsakanin ramin	nauyi Kg
UCP214F	70	125	74.6	73.3	264	157	210	6.3

Juyin juya hali a minti daya
iyaka	7000 rev
Garanti	1500 rev

matsayin ɗagawa

Z3V2

Kayan haɗi
Mai	ƘARAMIN-20 BABBAN+250
Ƙwallo	G8
Kayan Aiki	Gcr15
Keke	Mai Sauƙi
Kayan tubali	HT200
Zoben rufewa	F Nau'in lamba, mai hana ƙura, mai hana ruwa

masana'anta1
masana'anta2
masana'anta3 Ma'anar Asali & Siffofin Tsarin
Bearings na UCP214 (Bearings na Filogi tare da Sakawa) na'urori ne da aka riga aka haɗa waɗanda suka ƙunshi abin saka bearing da aka sanya a cikin ƙarfen siminti ko kuma sandar ƙarfe da aka matse. Manyan halaye sun haɗa da:
• Siffar Waje Mai Siffa: Diamita na waje mai ɗaukar bearing yana da ƙirar siffar ƙwallo, wanda ke ba da damar daidaita kanta da ±3°.
• Tsarin da aka riga aka rufe: Hatimin roba na yau da kullun (tsarin RS ko 2RS) suna ba da kariya mai ƙimar IP54 daga ƙura da shigar ruwa.
• Gidaje Masu Daidaituwa: Ya dace da ISO 113:2015, yana tabbatar da cewa ana iya musayar tazara tsakanin ramukan da aka ɗora.
2. Ka'idojin Aiki & Halayen Inji
2.1 Tsarin Watsa Loda
Canja wurin kaya yana faruwa ta hanyar abubuwan birgima (ƙwallon ƙarfe) tsakanin zoben ciki da na waje:
• Nauyin Radial: Ana watsa shi tare da radius ɗin bearing (wanda ya kai ~70% na ƙarfin kaya).
• Nauyin Axial: Yana ɗaukar ƙarfin axial na hanya ɗaya (≈20% na ƙarfin ɗaukar nauyin radial).
2.2 Halayen Tribological
• Matsakaicin gogayya mai ƙanƙanta: 0.001–0.003
• Matsakaicin gudu: 3,000 rpm tare da man shafawa mai tushen lithium (rayuwa mai tsawon sa'o'i 2,000 @ 70°C).
3. Yanayin Aikace-aikace na yau da kullun
3.1 Injinan Noma
• Haɗa sandunan tuƙi na masu girbi (zafin aiki: -30°C zuwa 80°C)
• Na'urorin rage tsutsotsi na tsarin ban ruwa (suna buƙatar rufin hana tsatsa)
3.2 Masana'antar Sarrafa Abinci
• Na'urorin tuƙi na conveyor bel (nau'ikan ƙarfe marasa ƙarfe masu bin ka'idar FDA)
• Tsarin crank a cikin injunan marufi (tare da jure wa ɗimbin girgiza mai zagaye)
3.3 Kayan Aikin Haƙar Ma'adinai
• Allon girgiza a cikin na'urorin murƙushewa (yana buƙatar ƙarin hatimin labyrinth)
• Na'urorin jujjuya bel na masu ɗaukar bel (maganin shafawa na musamman don muhallin ƙura)
4. Jagororin Zaɓin Fasaha
Lambar Raka'a Mai Haɗawa. Girma (in.) ko (mm) Ƙofar da aka yi amfani da ita mm/in. Lambar Haɗawa. Nauyi (kg)
d h a e bs s1
UCP214 70 79.4 266 210 72 25 M20 UC214 6.3
UCP214-42 2-5/8 3-1/8 10-15/32 8-17/64 2-27/32 63/64 3/4 UC214-42 6.3
UCP214-43 2-11/16 3-1/8 10-15/32 8-17/64 2-27/32 63/64 3/4 UC214-43 6.3
UCP214-44 2-3/4 3-1/8 10-15/32 8-17/64 2-27/32 63/64 3/4 UC214-44 6.3